Инжекционната помпа IC 100, заедно с IC 120, е предназначена за инжектиране на циментови и бентонитни смеси в областта на специални строителни основи (инжектиране на микропилоти, инжектиране на анкери, запечатване на фундаментни почви, инжектиране на пълнеж), в подземното строителство и в областта на санирането на бетонни конструкции (запълващо инжектиране на бетон и зидария). Максималното налягане на впръскване на помпата е 7,5 MPa, максимално подаваното количество на сместа е 75 л/мин.
ПРЕДИМСТВА
- плавно регулиране на производителността в пълен обем (регулираща хидравлична помпа)
- голяма производителност (до 75 л/мин)
- високо работно налягане (до 7,5 MPa)
- компактни размери (120 x 80 см)
- автоматично охлаждане на хидравличната верига (хидравличен охладител)
- електронно управление на движението на работната част (индуктивни сензори)
- наблюдение на изпомпваното количество (брояч на циклите)

Working principle
The IC 100 grouting pump is an electrohydraulic double-acting plunger pump. IC 100The hydraulic part consists of a hydroelectric generator with continuous control, an electrohydraulic distributor and hydraulic motor. Pressure control in the hydraulic system is ensured by a safety valve. Oil temperature in the hydraulic circuit is controlled by a hydraulic cooler, which is turned on automatically after the pre-set limit temperature (65 °C) is reached.
The working part consists of a working cylinder with four ball check valves, which are connected to the suction and discharge pipe. The discharge pipe is fitted with a manometer wit oil protection and a screw unions for high-pressure hoses.
The electric part consists of a distributor with Start and Stop buttons for common operation. The Central Stop button is used as a safety feature. The direction of the movement of the cylinder plunger is controlled by two induction sensors.The correct rotation direction is controlled by phase sequence control.
In its basic version, the IC 100 pump is fitted with a mechanical working cylinder cycle counter, which makes it possible to derive indirectly the volume of the injected mixture.

Technical data
Parameter | IC 100 |
Max. output [l/min] | 75 |
Max. pressure [MPa] | 7,5 |
Volume of mixture pumped in one cycle [l] | 3 |
Maximum granularity [mm] | 0,5 |
Maximum mixture volume weight [kg/l] | 2 |
Electric motor input [kW] | 7,5 |
Outlet | DN 25 |
Dimensions and weight | |
Length [mm] | 1200 |
Width [mm] | 800 |
Height [mm] | 850 |
Weight (with oil charge) [kg] | 480 |


Photogallery

Practical demonstration

Download
