Grouting pump IC 120 is designed for injection of cement and bentonite mixtures in grouting work, such as micro-piles injection, anchor grouting, foundation ground solidifying and sealing. The pump’s maximum injection pressure is 10 MPa and the maximum volume of mixture supplied is 51 l/min.
The pump can be supplied separately or as part of a station along with Colloidal activating mixer AM 200 and final mixer DM 1. The pump, the activating mixer and the agitator can be used as separate units or installed onto a common frame to make up a compact injection centre.
continuous injection mixture volume regulation in relation to pressure
continuous injection mixture dosing by two plungers
can be used separately or as part of an injection station
easy handling in confined spaces
robust structure allowing work in difficult conditions
The pump has an electrohydraulic drive with a hydraulic generator, which is placed on the same frame as the pump. However, the generator can be easily uninstalled and connected to the pumping part by a pair of high-pressure hoses (up to 15 metres in length). The separation of the two parts makes it easier to handle the machine in confined spaces during rehabilitation work and during underground work.
The pumping part consists of two single-acting plunger pumps powered by hydraulic motors. The double-action cycle is synchronized by means of induction sensors and an electrohydraulic distributor.
The injection pressure / instantaneous power relation is controlled in two different ways depending on the type of hydraulic generator used: a) in the basic version, three-step volume regulation with pre-set maximum injection pressure is used, b) on request, continuous regulation by a hydraulic generator with constant pressure control can be used.
The pump can be fitted with an electronically controlled hydraulic generator or with injection progress monitoring system. In its basic version, the machine is fitted with a plunger stroke counter, i.e. indirect monitoring of the mixture volume injected. The plunger packing is lubricated in an oil bath.
|Max. output [l/min]
|Max. pressure [MPa]
|Volume of mixture pumped in one cycle [l]
|Max. grain size [mm]
|Maximum mixture volume weight [kg/l]
|Electric motor input [kW]
|Dimensions and weight
|Weight (with oil charge) [kg]